|
|
PLANET IGT-900-1T1S on laajalämpötilainen hallittava
industrial-mediamuunnin yhdellä 10/100/1000Base-T Ethernet-
kupariportilla sekä yhdellä 100/1000/2500Base-X SFP
modulipaikalla. Layer 3 reititysominaisuuksilla
varustettu mediamuunnin on varustettu lisäksi monipuolisilla
hallinta- ja tietoturva-ominaisuuksilla, joten se soveltuu
hyvin vaativimpiin operaattoritason
sekä teollisuuden tuotantoympäristöihin.
Tekniset tiedot:
• Physican port:
- 1x 10/100/1000BASE-T Gigabit Ethernet RJ45 port
- 1x 100/1000/2500BASE-X SFP port for SFP type auto
detection
• Industrial Protocol
- Modbus TCP for real-time monitoring in the SCADA system
- IEEE 1588v2 PTP (Precision Time Protocol) transparent
clock mode
• Industrial Case and Installation
- IP30 metal case
- DIN-rail or wall-mount design
- 24VAC, 9...48VDC, redundant power with reverse polarity
protection
- Supports 6KVDC Ethernet ESD protection
- -40...+75C operating temperature
• Layer 3 IP Routing Features
- Supports maximum 32 static routes and route summarization
- Routing interface provides per VLAN routing mode
• Layer 2 Features
- Storm Control support
- Broadcast/Multicast/Unicast
• Supports VLAN
- IEEE 802.1Q tagged VLAN
- Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Port Isolation
- MAC-based VLAN
- IP Subnet-based VLAN
- Protocol-based VLAN
- VLAN Translation
- Voice VLAN
- GVRP
• Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
• BPDU Filtering/BPDU Guard
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic
on a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection
(UDLD) that monitors a link between two switches and blocks
the ports on both ends of the link if the link fails at any
point between the two devices
• Link Layer Discovery Protocol (LLDP)
• IEEE 802.3ah OAM
• Link Fault Passthrough (LFP)
• The IGT-900-1T1S supports one group (TP Port 1 and SFP
Port 2) LFP function.
• Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8x priority queues on all switch ports
• Traffic classification
• IEEE 802.1p CoS
• IP TOS/DSCP/IP precedence
• IP TCP/UDP port number
• Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing on the switch port
• DSCP remarking
• Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port filtering
• IPv6 MLD snooping port filtering
• MVR (Multicast VLAN Registration)
• Authentication
• IEEE 802.1x port-based/MAC-based network access
authentication
• Built-in RADIUS client to co-operate with the RADIUS
servers
• TACACS+ login users access authentication
• RADIUS / TACACS+ users access authentication
• Guest VLAN assigns clients to a restricted VLAN with
limited services
• Access Control List
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snooping to filter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder
• Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
• Web switch management
• Telnet Command Line Interface
• SNMP v1 and v2c switch management
• SSHv2, TLSv1.2 and SNMP v3 secure access
• SNMP Management
• Four RMON groups (history, statistics, alarms, and events)
• SNMP trap for interface Link Up and Link Down notification
• IPv6 IP Address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
• Firmware upload/download via HTTP
• Reset button for system reboot or reset to factory default
• Dual Images
• DHCP Relay and DHCP Option82
• DHCP Server
• User Privilege levels control
• NTP (Network Time Protocol)
• UPnP
• Network Diagnostic
• ICMPv6/ICMPv4 Remote Ping
• Cable Diagnostic technology provides the mechanism to
detect and report potential cabling issues
• SFP-DDM (Digital Diagnostic Monitor)
• SMTP, Syslog and SNMP trap remote alarm
• Local system Log
• PLANET Smart Discovery Utility for deployment management
• PLANET NMS system and CloudViewer for deployment
management