Microdata Finland Oy - Tietoliikennetukkuri


Valmistajat

PLANET 1x RS-232/422/485, SFP Device server
Tuotekoodi: PLANET-IMG-2105AT
Valmistajan koodi: IMG-2105AT
Tuotteen nimi: PLANET 1x RS-232/422/485, SFP Device server
IP30 Modbus Gateway
Tuoteryhmä: Teollisuus-automaatio
Valmistaja: PLANET Technology
Viivakoodi: 4711605285131
Takuuaika 24 kk
Lisätiedot: Avaa tuotesivu
Tuote-esite
Lataa käsikirja / asennusohje
Pika-asennusopas (QIC)
Tuote-esitys
Myyntiopas
Ajuri / FW / Ohjelmisto
CE-hyväksyntä
PLANET-IMG-2105AT


PLANET IMG-2105AT on teollisuuskäyttöön suunniteltu 1-
porttinen RS-232/422/485 Modbus yhdyskäytävä yhdellä
SFP-modulipaikalla. IMG-2105AT mahdollistaa RTU
päätelaitteiden liittämisen Ethernet-lähiverkkoon. Laite on
metallikoteloitu ja suunniteltu toimimaan laajennetulla
käyttölämpötila-alueella.

Tekniset tiedot:
• 1x RS422/485 port with 5-contact terminal block
• Cost effective for RS422/RS485 to Fast Ethernet
10/100BASE-TX application
• Supports 4-wire RS422 or 2-wire RS485 with 5-contact
terminal block operation
• 300...115200bps baud rate and non-blocking communication
• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX
standard
• Supports 10/100BASE-TX RJ45 port with distance up to 100m
• Built-in IP-based Web interface and telnet interface for
remote management
• Software Protocol supports Modbus TCP, Modbus RTU, Modbus
ASCII, IP, ARP, DHCP and DNS
• Supports RTU Master, RTU Slave, ASCII Master, and ASCII
• Slave four serial operation modes via management interface
• Master mode supports 32 slave TCP connection requests
• Slave mode supports 16 TCP master connections
• Supports IP address and MAC address filtering function
• PLANET Modbus Gateway utility for finding client device on
the network and related IP subnet address setting, to reset
to factory default function
• PLANET Smart Discovery utility automatically finds the
client devices on the network
• Firmware upgrade/configuration backup and restore via HTTP
protocol
• LED indicators for system, network and RS422/585 port
diagnostics
• DIP switch on the upper panel for resetting to factory
default
• Wall-mount kit
• Wallmount-type IP30 metal case
• The 2-contact terminal block connector on the top panel of
Industrial Modbus Gateway is used for DC power input (9-48V)
• -40...+75C operating temperature


Tuotteeseen liittyviä muita tuotteita: