|
|
Sebury DR300 on tietokoneen USB-porttiin kytkettävä RFID
EM/NFC-lukija/kirjoittaja (125kHz / 13.56MHz), joka toimii
ilman erillisiä ajureita (HID-yhteensopiva) kaikissa
tietokoneissa.
Ominaisuudet:
• Compliant with CCID
• Compliant with PC/SC
• Support IC/ID dual frequency replication
• Driver-free, no need to download software installation
• When connect the RFID Reader to the computer with the USB
cable, then can find the software.
• Support ID125K, 8800, 5200, 4305, 5577, 8265 card.
• Support UID FUID CUID UFUID IC semi-encrypted card, Most
of IC full encryption card.
• Has USB full speed interface
• Two-color LED light prompt (red light is standby, green is
working)
• Built-in buzzer "beep" sound reminder
Teknise tiedot:
• Dimensions: 108 (L) X 68 (W) X 12 mm (H)
• Interface: USB full speed
• Working Voltage: 5 VDC
• Working current: 200mA
• Standby current: 50mA
• Normal current: 100mA
• Working frequency: 125KHz / 13.56 MHz
• Smart card support:
- 125KHz ID type: EM4100, TK4100, 8800, 5200, EM4305, T5577,
8265 etc.
- 13.56MHz IC type: UID FUID CUID UFUID, Most of IC Half-
encryption, IC Full-encryption etc.
• Supported operating systems: Support Windows computer. Not
support Linux, Mac.
How to use the card reader?
1. Connect the device to your computer with the USB cable.
2. You can view and open the software on your computer.
Read and write ordinary 125KHz RFID card
1. Place the card on the card reader and press "Read" on the
software to scan the card.
2. The software will scan and display the card number
3. Place a writable T5577 (125KHz writable chip) on the card
reader and press "Write" on the software.
Read and write 13.56MHz IC, IC half encryption card, IC full
encryption card
1. Place the card on the card reader and press "Card number"
or "Start decoding" on the software.
2. Place a writable UID (13.56MHz writable chip) on the card
reader and press "Write Card" on the software.