|
![]() |
KingPigeon K5S on monipuolinen hälytyksensiirtolaite, joka
mahdollistaa vanhojen analogisten puhelinverkossa toimivien
hälytysjärjestelmien (Ademco Contact ID) siirtämiseksi
nykyaikaisiin GSM/SMS/GPRS/Ethernet-pohjaisiin hälytysten
siirtoihin. Laitteen mukana toimitetaan helppokäyttöinen
Windows hallintaohjelmisto. Myös Android pohjainen
ohjelmisto saatavilla.
Ominaisuudet:
• Easy programmed by PC configuration, compatible with
most Control Panels
• Support modular system
• Supports transferring data by PSTN Ethernet or GPRS, SMS
(no phone call)
• Supports 2x different CMS centers (IP addresses or DNS
server)
• SMS notification when the connection with the CMS center
is failed (3x trial times)
• When PSTN network failed, it will send the alert message
to the center by Ethernet/GPRS network
• When the PSTN network good, then it will not use GPRS
network etc. for transferring alert message
• 5x users to receive SMS notification on Alarm,
Supervision, Trouble, By pass, Test, GPRS fail, DC loss,
• SMS commands to check the device version, IMEI code, GSM
signal
• 2x OC outputs which could be controlled by SMS commands,
output pulse time can be set.
• Support firmware upgrading via USB
• Supports PIN code verification in PC configurator
• Remote configuration by SMS commands
• Backup rechargeable battery, with DC power failure SMS
alert
Tekniset tiedot:
• Signal Frequency: GSM850/900/1800/1900MHz
• Digital Output:2 OC, 1A/12VDC
• Max. Stored Phone No.: 5x phone numbers for alarm SMS
• PSTN Protocol: Ademco Contact ID SIA DC-05
• GPRS Protocol: SIA DC-09-2007 or SIA DC-09-2012 protocol
• Rated Power Supply: 9...12VDC/1A
• Power Consumption: 12VDC input Max. 270mA, Standby 28mA
• SIM Card: Support 3V SIM Card
• Antenna: 50 Ohm SMA Antenna interface
• Temperature Range: -20...+60C
• Backup Battery: 3.7V/900mAh Li-ion
• Enclosure Material: Metal material
• Exterior Dimension: 105 x 88 x 30mm
• Net Weight: 500g
Tuotepakkauksen sisältö:
• K5S keskusyksikkö
• Antenni
• Backup Battery (sisäänrakennettu)
• Virtalähde (12VDC @ 1A)
• Käsikirja + ohjelmisto-CD
• USB kaapeli