|
|
LANET XGS-6320-8X8TR on 16-porttinen L3-tason 10G
Ethernet-kytkin, jossa on 8x 10GBASE-X SFP+ -moduulipaikkaa
ja 8x 10GBASE-T Ethernet-kupariporttia.
Kuituportit tukevat 10GBASE-SR/LR- sekä
1G/2.5G-SFP-moduuleita, ja kupariportit toimivat
100M/1G/2.5G/5G/10G-nopeuksilla.
Kytkin sisältää 320Gbit/s non-blocking kytkinarkkitehtuurin
ja tarjoaa L3-reititysominaisuudet, kuten staattisen
reitityksen, RIP v2:n ja OSPF-reitityksen.
L2-toiminnot kattavat 802.1Q-VLANit, Q-in-Q-tunneloinnin,
Private VLAN Edgen, MAC- ja protokollapohjaiset VLANit,
MSTP/RSTP/STP-silmukansuojauksen, LACP-linkkien yhdistämisen
sekä IGMP/MLD-ryhmävalvonnan. Turvaominaisuuksiin kuuluvat
802.1X-autentikointi, RADIUS/TACACS+, ACL-suodatus sekä DHCP
Snooping, Dynamic ARP Inspection ja IP Source Guard.
Hallinta onnistuu web-käyttöliittymän, SSH:n, TLS:n,
SNMPv3:n, Telnetin ja konsolin kautta. SFP-moduuleille on
tarjolla DDM-diagnostiikka, ja kytkin tukee UNI-NMS- ja
CloudViewer-etähallintaa.
XGS-6320-8X8TR sisältää 100-240VAC -verkkovirtalähteen ja
36-60VDC -redundanttivirransyötön, kaksi älytuuletinta ja
0...+50°C käyttölämpötila-alueen, mikä tekee siitä
luotettavan runko- ja jakelutason kytkimen vaativiin yritys-
ja teollisuusverkkoihin.
Pakkaus sisältää kytkimen lisäksi DB9-RJ45-konsolikaapelin,
räkkikiinikkeet, virtajohdon, sekä englanninkielisen
pikaoppaan.
Tekniset tiedot:
• 8x 10GBASE-T RJ45 ports, backward compatible with
100/1G/2.5G/5GBASE-T auto-negotiation
• 8x 10GBASE-X SFP+ ports, backward compatible with
100BASE-FX, 1000BASE-X and 2500BASE-X SFP transceivers
• RJ45 type RS232 console interface for switch basic
management
• Redundant 100-240VAC and 36-60VDC dual power
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply
• Fault tolerance and resilience
• IPv4 dynamic routing protocol supports RIPv2 and OSPFv2
and IPv6 OSPFv3
• IPv6 dynamic routing protocol supports OSPFv3
• IPv4/IPv6 hardware static routing
• Routing interface provides per VLAN routing mode
• Storm Control support:
- Broadcast/Multicast/Unknown unicast
• Supports VLAN:
- IEEE 802.1Q tagged VLAN
- Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
- GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol:
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1w Rapid Spanning Tree Protocol
- IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree
by VLAN
- BPDU Guard
• Supports Link Aggregation:
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
-Maximum 8 trunk groups, up to 16 ports per trunk group
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic
on a particular port
• Loop protection to avoid broadcast loops
• Link Layer Discovery Protocol (LLDP)
• Compatible with Cisco uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any
point between the two devices
• Supports G.8032 ERPS (Ethernet Ring Protection Switching)
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Traffic classification:
- IEEE 802.1p CoS
- TOS/DSCP/IP Precedence of IPv4/IPv6 packets
- IP TCP/UDP port number
- Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing on the switch port
• DSCP remarking
• Supports IPv4 IGMP Snooping v1, v2 and v3
• Supports IPv6 MLD Snooping v1 and v2
• Querier mode support
• IPv4 IGMP Snooping port filtering
IPv6 MLD Snooping port filtering
• Multicast VLAN Registration (MVR) support
• Authentication:
- IEEE 802.1x Port-based/MAC-based network access
authentication
- Built-in RADIUS client to co-operate with the RADIUS
servers
- TACACS+ login users access authentication
- RADIUS/TACACS+ users access authentication
- Guest VLAN assigns clients to a restricted VLAN with
limited services
• Access Control List:
- IP-based Access Control List (ACL)
- MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snooping to filter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces:
- Web switch management
- Console and Telnet Command Line Interface
- SNMP v1 and v2c switch management
- SSHv2, TLSv1.2 and SNMPv3 secure access
• SNMP Management:
- Four RMON groups (history, statistics, alarms and events)
- SNMP trap for interface Linkup and Linkdown notification
• IPv6 IP Address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance:
- Firmware upload/download via HTTP/TFTP
- Reset button for system reboot or reset to factory default
- Dual Images
• DHCP Functions:
- DHCP Relay
- DHCP Option82
- DHCP Server
• User Privilege levels control
• NTP (Network Time Protocol)
• Network Diagnostic
- ICMPv6/ICMPv4 Remote Ping
- SFP-DDM (Digital Diagnostic Monitor)
• SMTP, Syslog and SNMP trap remote alarm
• System Log
• PLANET Smart Discovery Utility for deployment management
• PLANET UNI-NMS (Universal Network Management) and
CloudViewer app for deployment management
• Switch Fabric: 320Gbit/s/non-blocking
• Throughput: 238.1Mpps @ 64Bytes packet
• Address Table: 32k entries, automatic source address
learning and aging
• Shared Data Buffer: 32Mbit/s
• Power Requirements:
- AC: 100-240VAC, 50/60Hz, 2.1A max.
- DC: 36-60VDC, 2A
• Power Consumption:
- AC Input:
- System On: 22W
- Full load: 44W
- DC Input:
- System on: 25W
- Full load: 45W
• ESD Protection: 6kV DC
• Surge Protection: 4kV DC
• Fan: 2 smart fans
• Dimensions: 444 x 200 x 44mm, 1U height
• Weight: 2870g
• Operating Temperature: 0...+50C
• Compliance: FCC Part 15 Class A, CE