PLANET IGS-10020MT on teollisuuskäyttöön soveltuva 10-
porttinen hallittava L3-tason staattisella reitityksellä
varustettu 10/100/1000 (8x TX + 2x SFP) Ethernet-
kytkin laajennetulla käyttölämpötila-alueella sekä DIN-
kiskokiinnityksellä.
Tekniset tiedot:
• 8x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
• 2x 100/1000/2500BASE-X SFP slots for SFP type
auto detection
• IP30 aluminum case protection
• DIN-rail or wall-mount design
• Redundant power design
- 12...48VDC, redundant power with polarity reverse protect
function
- AC 24V power adapter acceptable
• Supports 6000 VDC Ethernet ESD protection
• -40...+75C operating temperature
• Modbus TCP for real-time monitoring in SCADA system
• IEEE 1588v2 PTP (Precision Time Protocol) transparent
clock
• High performance of Store-and-Forward architecture and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
• Storm Control support
- Broadcast, Multicast and Unknown Unicast
• Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095 VLAN IDs
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
- GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
- BPDU Guard
• Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 5 trunk groups, up to 10 ports per trunk group
- Up to 26Gbps bandwidth (duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic
on a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection
(UDLD) that monitors a link between two switches and blocks
the ports on both ends of the link if the link fails at any
point between the two devices
• Link Layer Discovery Protocol (LLDP)
• Layer 3 IP Routing Features
- Supports maximum 32 static routes and route summarization
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8x priority queues on all switch ports
• Traffic classification
- IEEE 802.1p CoS
- IP TOS/DSCP/IP precedence
- IP TCP/UDP port number
- Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing on the switch port
• DSCP remarking
• Supports IPv4 IGMP Snooping v1, v2 and v3
• Supports IPv6 MLD Snooping v1 and v2
• Querier mode support
• IPv4 IGMP Snooping port filtering
• IPv6 MLD Snooping port filtering
• MVR (Multicast VLAN Registration)
• Authentication
- IEEE 802.1x Port-based/MAC-based network access
authentication
- Built-in RADIUS client to cooperate with the RADIUS
servers
- TACACS+ login users access authentication
- RADIUS/TACACS+ users access authentication
• Access Control List
- IP-based Access Control List (ACL)
- MAC-based Access Control List
• Source MAC/IP address binding
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
• MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
- Telnet Command Line Interface
- Web switch management
- SNMP v1 and v2c switch management
- SSH/TLS and SNMP v3 secure access
• SNMP Management
- Four RMON groups (history, statistics, alarms, and events)
- SNMP trap for interface Link Up and Link Down notification
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
- Firmware upload/download via HTTP/TFTP
- Reset button for system reboot or reset to factory default
- Dual Images
• DHCP Relay and DHCP Option 82
• DHCP Server
• User Privilege levels control
• Network Time Protocol (NTP)
• SFP-DDM (Digital Diagnostic Monitor)
• Network Diagnositc
- ICMPv6/ICMPv4 Remote Ping
- Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
• PLANET Smart Discovery Utility for deployment management
• Dimensions: 56x87.8x135mm
• Weight: 720g
• Compliance: FCC Part 15 Class A, CE
Tuoteviittaukset:
