Microdata Finland Oy - Tietoliikennetukkuri


Valmistajat

8x100/1000T PoE++ 2x Gb SFP +2x10G SFP
Tuotekoodi: PLANET-IGS-6329-8UP2S2X
Valmistajan koodi: IGS-6329-8UP2S2X
Tuotteen nimi: 8x100/1000T PoE++ 2x Gb SFP +2x10G SFP
-40...+75 Industrial Switch, SNMP, L3, IP30
Tuoteryhmä: Industrial PoE
Valmistaja: PLANET Technology
Viivakoodi: 4711605286381
Takuuaika 24 kk
Lisätiedot: Avaa tuotesivu
Tuote-esite
Pika-asennusopas (QIC)
Tuote-esitys
Myyntiopas
PLANET-IGS-6329-8UP2S2X


PLANET IGS-6329-8UP2S2X on teollisuuskäyttöön suunniteltu
12-porttinen hallittava DIN-kiskoon asennettava UltraPoE
(802.3bt) Etehernet-kytkin laajennetulla käyttölämpötila-
alueella. L3-kytkin on varustettu 8x 10/100/1000Base-T PoE++
kupariporteilla, 2x 100/1000/2,5G SFP-portilla sekä 2x 10G
SFP+ modulipaikoilla. Kytkimessä on lisäksi kehittyneemmät
hallintapuolen turvaominaisuudet sekä IEEE 1588
aikaprotokollatuki aikakriittisisiin sovelluksiin. IGS-6329
tukee lisäksi raskaampia teollisuuden EMC hyväksyntöjä EN
61000-6-2 sekä 61000-6-4 ja rautatieliikenteen EN 50121-4
hyväksyntää.

Tekniset tiedot
  8x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with
802.3bt PoE++ Injector function
  2x 100/1000/2500BASE-X SFP slots for SFP type auto
detection
  2x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-X
and 2500BASE-X SFP
  1x RJ45-to-RS232 console interface for basic management
and setup
  Industrial Hardened design
  Dual power input, redundant power with reverse polarity
protection
  DC 48 to 54V input
  Active-active redundant power failure protection
  Backup of catastrophic power failure on one supply
  Fault tolerance and resilience
  DIN-rail and wall-mountable design
  IP30 aluminum case
  Supports ESD 6kVDC Ethernet protection
  -40...+75C operating temperature
  2x Digital Input (DI)
  2x Digital Output (DO)
  Integrate sensors into auto alarm system
  Transfer alarm to IP network via email and SNMP trap
  802.3bt Power over Ethernet
  Complies with IEEE 802.3bt Power over Ethernet Plus Plus
Type-4 PSE
  Backward compatible with IEEE 802.3at/af PD device
  Up to 8 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt
PoE++ devices powered
  Supports PoE power up to 95W for each PoE port
  Total of 360W PoE budget
  Auto detects powered device (PD)
  Circuit protection prevents power interference between
ports
  Remote power feeding up to 100m
  PoE management features
  Total PoE power budget control
  Per port PoE function enable/disable
  PoE admin-mode control
  PoE port power feeding priority
  Per PoE port power limit
  PD classification detection
  PoE extend mode control to support power feeding up to a
distance of up to 160 meters
  Intelligent PoE features
  Temperature threshold control
  PoE usage threshold control
  PD alive check
  PoE schedule
  Layer 3 IP Routing Features
  IP dynamic routing protocol supports RIPv2, OSPFv2 and
OSPFv3
  IPv4/IPv6 hardware static routing
  Routing interface provides per VLAN routing mode
  Layer 2 Features
  High performance of Store-and-Forward architecture, and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
  Storm Control support
  Broadcast/Multicast/Unicast
  Supports VLAN
  IEEE 802.1Q tagged VLAN
  Supports provider bridging (IEEE 802.1ad VLAN Q-in-Q)
  Private VLAN Edge (PVE)
  Protocol-based VLAN
  MAC-based VLAN
  Voice VLAN
  GVRP (GARP VLAN Registration Protocol)
  Supports Spanning Tree Protocol
  IEEE 802.1D Spanning Tree Protocol (STP)
  IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
  IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
  BPDU Guard
  Supports Link Aggregation
  802.3ad Link Aggregation Control Protocol (LACP)
  Cisco ether-channel (static trunk)
  Maximum 4 trunk groups with 4 ports per trunk group
  Up to 40Gbps bandwidth (duplex mode)
  Provides port mirror (many-to-1)
  Port mirroring to monitor the incoming or outgoing traffic
on a particular port
  Loop protection to avoid broadcast loops
  Link Layer Discovery Protocol (LLDP)
  Compatible with Cisco uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any
point between the two devices
  Supports G.8032 ERPS (Ethernet Ring Protection Switching)
  IEEE 1588v2 PTP (Precision Time Protocol) transparent
clock mode
  Quality of Service
  Ingress Shaper and Egress Rate Limit per port bandwidth
control
  8x priority queues on all switch ports
  Traffic classification
  IEEE 802.1p CoS
  IP TOS/DSCP/IP precedence
  IP TCP/UDP port number
  Typical network application
  Strict priority and Weighted Round Robin (WRR) CoS
policies
  Supports QoS and In/Out bandwidth control on each port
  Traffic-policing on the switch port
  DSCP remarking
  Multicast
  Supports IPv4 IGMP snooping v1, v2 and v3
  Supports IPv6 MLD snooping v1 and v2
  Querier mode support
  IPv4 IGMP snooping port filtering
  IPv6 MLD snooping port filtering
  MVR (Multicast VLAN Registration)
  Security
  Authentication
  IEEE 802.1X Port-based/MAC-based network access
authentication
  Built-in RADIUS client to cooperate with the RADIUS
servers
  TACACS+ login users access authentication
  RADIUS/TACACS+ users access authentication
  Guest VLAN assigns clients to a restricted VLAN with
limited services.
  Access Control Lit
  IP-based Access Control List (ACL)
  MAC-based Access Control List
  Source MAC/IP address binding
  DHCP snooping to filter distrusted DHCP messages
  Dynamic ARP Inspection discards ARP packets with invalid
  MAC address to IP address binding
  IP Source Guard prevents IP spoofing attacks
  IP address access management to prevent unauthorized
intruder
  Switch Management
  IPv4 and IPv6 dual stack management
  Switch Management Interfaces
  Console and Telnet Command Line Interface
  HTTP web switch management
  SNMP v1 and v2c switch management
  SSHv2, TLSv1.2 and SNMPv3 secure access
  SNMP Management
  Four RMON groups (history, statistics, alarms, and events)
  SNMP trap for interface Link Up and Link Down notification
  IPv6 IP address/NTP/DNS management
  Built-in Trivial File Transfer Protocol (TFTP) client
  BOOTP and DHCP for IP address assignment
  System Maintenance
  Firmware upload/download via HTTP
  Reset button for system reboot or reset to factory default
  Dual images
  DHCP Relay and Option 82
  DHCP Server
  User Privilege levels control
  Network Time Protocol (NTP)
  Network Diagnostic
  SFP-DDM (Digital Diagnostic Monitor)
  Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
  ICMPv6/ICMPv4 remote ping
  SMTP, Syslog and SNMP trap remote alarm
  System Log
  PLANET Smart Discovery Utility for deployment management
  PLANET UNI-NMS (Universal Network Management) and Smart
  Discovery Utility for deployment management
  Provides ONVIF for co-operating with PLANET video IP
surveillances