|
|
PLANET TSN-6325-8T4S4X on teollisuuskäyttöön suunniteltu
hallittava Layer 3 TSN (Time-Sensitive Networking)
ethernet-kytkin, jossa on 8x 10/100/1000Base-T
kupariporttia, 4x 1000/2500Base-X SFP-
porttia ja 4x 10GBase- SR/LR SFP+ porttia.
Kestävä IP30-suojattu metallikotelo, DIN-kisko- ja
seinäkiinnitysmahdollisuus sekä laajennettu
käyttölämpötila-alue (-40...+75C) tekevät siitä luotettavan
ratkaisun vaativiin teollisuusympäristöihin ja
runkoverkkoihin. Laitteen 116 Gbit/s kytkentäkangas ja
wire-speed-läpivienti mahdollistavat erittäin suuren
kapasiteetin ja vakauden myös raskaissa sovelluksissa.
TSN-6325-8T4S4X tukee IEEE 1588v2 PTP-aikasykronointia
kaikissa porteissa sekä keskeisiä TSN-standardeja, kuten
IEEE 802.1AS-Rev, 802.1Qbv, 802.1Qbu, 802.3br, 802.1Qci ja
802.1CB. Tämä mahdollistaa erittäin pienen viiveen ja
luotettavan reaaliaikaisen tiedonsiirron, mikä tekee
laitteesta erinomaisen valinnan Industry 4.0 -sovelluksiin,
5G NR -tukiasemien liityntöihin, Wi-Fi 6/6E -tukiasemiin,
4K/8K-videostriimaukseen ja VR/AR-ympäristöihin.
Laite tukee Layer 3 IP-reititystä (staattinen reititys, RIP,
OSPF), ERPS-rengassuojausta, MSTP:tä, VLAN-ominaisuuksia,
LACP-linkkiaggregaatiota sekä suojaustoimintoja, kuten ACL,
802.1X, DHCP Snooping ja IP Source Guard. Lisäksi siinä on
Boundary Clock- ja Transparent Clock -tilat aikakriittisiin
sovelluksiin sekä kattavat redundanssi- ja
hallintaominaisuudet.
Tuotepakkaus sisältää TSN-6325-8T4S4X-kytkimen, DIN-
kiskokiinnikkeen (esiasennettuna), seinäkiinnityslevyn ja
ruuvit, RJ45-DB9 RS232-konsolikaapelin sekä
englanninkielisen pikaoppaan.
Tekniset tiedot:
• 8x 10/100/1000BASE-T RJ45 copper ports
• 4x 1000/2500BASE-X SFP slots for SFP type auto detection
• 4x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-X
and 2500BASE-X SFP
• 1x RJ45-to-RS232 console interface for basic management
and setup
• Dual power input, redundant power with reverse polarity
protection:
- 9...48VDC input or 24VAC input
- Active-active redundant power failure protection
- Backup of catastrophic power failure on one supply
- Fault tolerance and resilience
• DIN-rail and wall-mountable designs
• IP30 aluminum case
• Supports 6000VDC Ethernet ESD protection
• -40...+75C operating temperature
• 2 digital input (DI)
• 2 digital output (DO)
• Integrates sensors into auto alarm system
• Transfers alarm to IP network via email and SNMP trap
• High Precision Time Synchronization:
- IEEE1588 (Time Stamping)
- 802.1AS-Rev gPTP default profile
• Shapers:
- 802.1Qbv Enhancements for Scheduled Traffic
- 802.1Qch (Cyclic Queuing and Forwarding)
• TSN Stream Policing:
- 802.1Qci (Per Stream Filtering and Policing)
• Redundancy:
- 802.1CB FRER for seamless redundancy
- Also standard Linear and Ring protection
• Delay Reduction:
- IEEE 802.1Qbu Frame Preemption,
- IEEE 802.3br Interspersing Express Traffic (IET)
• IPv4 dynamic routing protocol supports RIPv2 and OSPFv2
and IPv6 OSPFv3
• IPv6 dynamic routing protocol supports OSPFv3
• IPv4/IPv6 hardware static routing
• Routing interface provides per VLAN routing mode
• High performance of Store-and-Forward architecture, and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
• Storm control support:
- Broadcast/Multicast/Unknown unicast
• Supports VLAN:
- IEEE 802.1Q tagged VLAN
- Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
- GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
- BPDU Guard
• Supports Link Aggregation:
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 8 trunk groups, with 16 ports for each trunk
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic
on a particular port
• Loop protection to avoid broadcast loops
• Link Layer Discovery Protocol (LLDP)
• Compatible with Cisco uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any
point between the two devices
• Supports G.8032 ERPS (Ethernet Ring Protection Switching)
• IEEE 1588v2 PTP (Precision Time Protocol)
• Features IEEE 802.1AS Time Synchronization, IEEE 802.1Qbu
Frame Preemption, IEEE 802.1Qbv Enhancements for Scheduled
Traffic and IEEE 802.1CB Seamless Redundancy
• Ingress shaper and egress rate limit per port bandwidth
control
• 8 priority queues on all switch ports
• Traffic classification:
- IEEE 802.1p CoS
- ToS/DSCP/IP Precedence of IPv4/Ipv6 packets
- IP TCP/UDP port number
- Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing on the switch port
• DSCP remarking
• Voice VLAN
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port filtering
• IPv6 MLD snooping port filtering
• MVR (Multicast VLAN Registration)
• Authentication:
- IEEE 802.1x port-based/MAC-based network access
authentication
- IEEE 802.1x authentication with guest VLAN
- Built-in RADIUS client to cooperate with the RADIUS
servers
- RADIUS/TACACS+ users access authentication
- Guest VLAN assigns clients to a restricted VLAN with
limited services
• Access Control List:
- IP-based Access Control List (ACL)
- MAC-based Access Control List (ACL)
• Source MAC/IP address binding
• DHCP Snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces:
- Console and Telnet Command Line Interface
- HTTP web switch management
- SNMP v1 and v2c switch management
- SSHv2, TLSv1.2 and SNMPv3 secure access
• SNMP Management:
- Four RMON groups (history, statistics, alarms, and events)
- SNMP trap for interface Link Up and Link Down notification
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance:
- Firmware upload/download via HTTP
- Reset button for system reboot or reset to factory default
- Dual images
• DHCP Functions:
- DHCP Relay
- DHCP Option82
- DHCP Server
• User Privilege levels control
• Network Time Protocol (NTP)
• Network Diagnostic:
- SFP-DDM (Digital Diagnostic Monitor)
- ICMPv6/ICMPv4 remote ping
• SMTP/Syslog remote alarm
• System Log
• PLANET Smart Discovery Utility for deployment management
• PLANET UNI-NMS (Universal Network Management) and
CloudViewer app for deployment management
• Power Requirements:
- 9...48VDC @ 5A max.
- 24VA @ 2A max.
• Power Consumption:
- DC input:
- Max. 16.8 watts/57.3BTU (system on)
- Max. 38.2 watts/130.3BTU (Full loading)
- AC 24V input:
- Max. 21.7 watts/74BTU (system on)
- Max. 30 watts/102.3BTU (Full loading)
• Dimensions: 86 x 135 x 152mm
• Weight: 1597g