|
|
PLANET IGS-5225-8T2S2X on teollisuuskäyttöön suunniteltu
12-porttinen hallittava DIN-kiskoon asennettava Etehernet-
kytkin laajennetulla käyttölämpötila-alueella. L3-kytkin on
varustettu 8x 10/100/1000Base-T kupariportilla, 2x
100/1000 SFP-portilla sekä 2x 10G SFP+ portilla
(100/1000/2,5G alaspäin yhteensopivat).
Tekniset tiedot
8x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
2x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto
detection
2x 10GBASE-SR/LR SFP+ slots, backward compatible with
1000BASE-SX/LX/BX SFP
One RJ45 console interface for basic management and setup
IP30 aluminum case
DIN rail and wall-mount design
Redundant power design
- 12...48VDC, redundant power with polarity reverse protect
function
- 24VAC power input acceptable
Supports 6000V DC Ethernet ESD protection
-40...+75C operating temperature
2x Digital Input (DI)
2x Digital Output (DO)
Integrate sensors into auto alarm system
Transfer alarm to IP network via email and SNMP trap
Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
High performance of Store-and-Forward architecture, and
runt/CRC filtering that eliminates erroneous packets to
optimize the network bandwidth
Storm Control support
- Broadcast/Multicast/Unicast
Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095 VLAN IDs
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
- BPDU Guard
Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 6 trunk groups with 8 ports per trunk group
- Up to 16Gbps bandwidth (duplex mode)
Provides port mirror (1-to-1)
Port mirroring to monitor the incoming or outgoing traffic
on a particular port
Loop protection to avoid broadcast loops
Layer 3 IP Routing Features
- Supports maximum 32 static routes and route summarization
Ingress Shaper and Egress Rate Limit per port bandwidth
control
8x priority queues on all switch ports
Traffic classification
- IEEE 802.1p CoS
- IP TOS/DSCP/IP precedence
- IP TCP/UDP port number
- Typical network application
Strict priority and Weighted Round Robin (WRR) CoS
policies
Supports QoS and In/Out bandwidth control on each port
Traffic-policing policies on the switch port
DSCP remarking
Supports IGMP snooping v1, v2 and v3
Supports MLD snooping v1 and v2
Querier mode support
IGMP snooping port filtering
MLD snooping port filtering
MVR (Multicast VLAN Registration)
IEEE 802.1x Port-based/MAC-based network access
authentication
Built-in RADIUS client to cooperate with the RADIUS
servers
TACACS+ login users access authentication
RADIUS/TACACS+ users access authentication
IP-based Access Control List (ACL)
MAC-based Access Control List
Source MAC/IP address binding
DHCP snooping to filter distrusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
IP Source Guard prevents IP spoofing attacks
IP address access management to prevent unauthorized
intruder
Switch Management Interfaces
- Console/Telnet Command Line Interface
- Web switch management
- SNMP v1 and v2c switch management
- SSH/SSL and SNMP v3 secure access
Four RMON groups (history, statistics, alarms, and events)
IPv6 IP address/NTP/DNS management
Built-in Trivial File Transfer Protocol (TFTP) client
BOOTP and DHCP for IP address assignment
Firmware upload/download via HTTP/TFTP
DHCP Relay
DHCP Option 82
User Privilege levels control
Network Time Protocol (NTP)
Link Layer Discovery Protocol (LLDP)
SFP-DDM (Digital Diagnostic Monitor)
Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
Reset button for system reboot or reset to factory default
PLANET Smart Discovery Utility for deployment management