|
|
PLANET WGS-5225-8MT on teollisuuskäyttöön suunniteltu
8-porttinen (IP40 + M12 liittimet) hallittava
Ethernet kytkin laajennetulla käyttölämpötila-alueella.
Pakkaus sisältä Ethernet-kytkimen lisäksi 8-pin M12-to-RJ45
UTP kaapelin (2m), M12 5-pin A-coded female virtakaapelin
(1.2m), Wall-mount Kit, DIN-rail Kit, Magnet Kit, 8x M12
Female Dust Cap, M12 Power Waterproof Cap ja
englanninkielisen pikaoppaan.
Tekniset tiedot
• 8x 10/100/1000BASE-T, vibration-proof and dustproof M12
X-coded female connectors
• 1 pair of bypass protection
• IP40-rated metal case
• Redundant power design:
- 9 to 48VDC, redundant power with reverse polarity
protection
- Active-active redundant power failure protection
- Backup of catastrophic power failure on one supply
- Fault tolerance and resilience
• DIN-rail and wall-mount designs
• Supports 6000V DC Ethernet ESD protection
• -40...+75C operating temperature
• Modbus TCP for real-time monitoring in SCADA system
• IEEE 1588v2 PTP (Precision Time Protocol)
• Layer 3 IP Routing Features
• Supports maximum 32 static routes and route summarization
• High performance of Store-and-Forward architecture, and
runt/CRC filtering that eliminates erroneous packets to
optimize the network bandwidth
• Storm control support:
- Broadcast/Multicast/Unicast
• Supports VLAN:
- IEEE 802.1Q tagged VLAN
- Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- IP subnet-based VLAN
- Voice VLAN
- GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol:
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
- BPDU Guard
• Supports Link Aggregation:
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 4 trunk groups, with 8 ports for each trunk
- Up to 16Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring monitors the incoming or outgoing traffic
on a particular port
• Loop protection to avoid broadcast loops
• Supports ITU-T G.8032 ERPS (Ethernet Ring Protection
Switching)
• Compatible with Cisco Uni-directional link detection
(UDLD) that monitors a link between two switches and blocks
the ports on both ends of the link if the link fails at any
point between the two devices
• Link Layer Discovery Protocol (LLDP)
• Quality of Service
• Ingress shaper and egress rate limit per port bandwidth
control
• 8 priority queues on all switch ports
• Traffic classification:
- IEEE 802.1p CoS
- ToS/DSCP/IP precedence of IPv4/IPv6 packets
- IP TCP/UDP port number
- Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Traffic-policing on the switch port
• DSCP remarking
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port filtering
• IPv6 MLD snooping port filtering
• MVR (Multicast VLAN Registration)
• Authentication:
- IEEE 802.1x port-based/MAC-based network access
authentication
- IEEE 802.1x authentication with guest VLAN
- Built-in RADIUS client to cooperate with the RADIUS
servers
- RADIUS/TACACS+ users access authentication
• Access Control List:
- IP-based Access Control List (ACL)
- MAC-based Access Control List (ACL)
• Source MAC/IP address binding
• DHCP Snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces:
- Telnet command line interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
- SSHv2 and TLSv1.2 secure access
• SNMP Management:
- Four RMON groups (history, statistics, alarms, and events)
- SNMP trap for interface Link Up and Link Down notification
• IPv6 address/NTP management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance:
- Firmware upload/download via HTTP/TFTP
- Reset button for system reboot or reset to factory default
- Dual images
• DHCP relay and option 82
• DHCP server
• User privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network diagnostic:
- Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
- ICMPv6/ICMPv4 remote ping
• SMTP, Syslog and SNMP trap remote alarm
• System Log
• PLANET UNI-NMS (Universal Network Management) and Smart
• Discovery Utility for deployment management
• Dimensions: 245x140x24.4mm
• Weight: 1000g
• Power Consumpton:
- System on: Max. 7.68W / 26.21BTU
- Full load: Max. 11.04W / 37.67BTU
• Compliance: FCC Part 15 Class A, CE