|
|
PLANET BSP-360 on teollisuuskäyttöön suunniteltu hallittava
Gigabitin kytkin uudistuvan energian virransyötöllä, jossa
on 5x 10/100/1000Base-T kupariporttia, joista 4 tukee
802.3at PoE+ -syöttöä (30W/portti, yhteensä 120W).
BSP-360 on osa uusiutuvan energian PoE-järjestelmää ja
toimii aurinko-, tuuli- tai vesivoimalla. Se jatkaa PoE-
laitteiden toimintaa myös yöllä ulkoisen akkuvarauksen
avulla (hankittava erikseen), mahdollistaen IP-kameroiden ja
langattomien tukiasemien käytön syrjäisissä kohteissa ilman
verkkosähköä.
Laitteen integroitu MPPT-lataussäädin (Maximum Power Point
Tracker) hallitsee ulkoisia 24V litium- tai lyijyakkuja. Se
toimii DC-DC-muuntimena, joka muuntaa aurinkopaneelien
tuottaman jännitteen tehokkaasti akkujen lataukseen ja tukee
jopa 400W PV-moduulisyöttöä. Älykäs akkuhallinta valvoo
varaustilaa, suojaa alijännitteeltä ja ylläpitää akun täyden
latauksen.
Hallinta onnistuu verkkopohjaisen käyttöliittymän ja SNMP-
hallintaprotokollan kautta. Lisäksi BSP-360 voidaan liittää
PLANET NMS-360 -hallintajärjestelmään, joka tukee jopa 512
BSP-360-yksikköä ja 2048 PLANET IP-kameraa MQTT- ja ONVIF-
protokollien avulla.
Tuotepakkaus sisältää BSP-360-kytkimen, ruuviliittimen
virtaliitäntää varten sekä englanninkielisen pikaoppaan.
Tekniset tiedot:
• 5x 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE
802.3at/af PoE injector function (Port 1 to Port 4)
• RJ45 type interface for basic management and setup
• USB type A female for setting file backup and restoration
• Complies with IEEE 802.3at Power over Ethernet Plus end-
span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 4 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100 meters
• PoE management:
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE port power feeding priority
- Per PoE port power limitation
- PD alive check
- PoE schedule
• Battery type option: Lithium battery or lead-acid battery
• Easy diagnostic of the system operating status via LED
indicator
• Current battery usage status
• Low voltage cut-off protection: Send alert and cut off
power when the battery is low
• MPPT (Maximum Power Point Tracking) Charge Controller:
- Reverse current protection to prevent the current circuits
from flowing back to the PV panel
- Over-current protection
- Reverse polarity protection (for battery and charging
electrodes)
• IP30 aluminum case
• DIN-rail and wall-mounted designs
• Supports -10 to 60 degrees C operating temperature
• Supports ESD 6KV DC Ethernet protection
• Redundant power supply
• 24...45VDC wide power input
• Hardware-based 10/100Mbps (half/full duplex), 1000Mbps
(full duplex), auto-negotiation and auto MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering
and forwarding rates
• IEEE 802.3x flow control for full duplex operation and
back pressure for half duplex operation
• 8K MAC address table size
• Automatic address learning and address aging
• Internet types: Dynamic IP, static IP, PPPoE, L2TP, PPTP
• Static and dynamic (RIP1 and 2) routing
• IP/MAC-based bandwidth control
• Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for
various networking applications
• 802.1d STP and IGMP Proxy
• Port filtering allows which application can access the
Internet.
• MAC filtering allows you to include or exclude computers
and devices based on their MAC address
• URL filtering allows you to control access to Internet
websites in an URL list
• IP source guard prevents IP spoofing attacks
• DoS attack prevention
• Switch Management Interface
- IPv4 Web switch management
- SNMP v1, v2c
• Static and DHCP for IP address assignment
• System Maintenance:
- Firmware upload/download via HTTP
- Configuration upload/download through HTTP
- Hardware-based reset button for system reboot or reset to
factory default
• Network Time Protocol
• SNMP trap for Link Up and Link Down notification
• Event message logging to remote syslog server
• Supports PLANET ONVIF IP camera and snapshot function
• PLANET Smart Discovery Utility
• Supports PLANET NMS-360 Network Management Controller
• Battery Information:
- Type:
- Lithium Battery (Default)
- Lead-acid Battery
- FCV:
- Lithium Battery (Default)
- fixed 26.6V
- Lead-acid Battery
- 27.2V (26.0...30.0V)
- ACV:
- Lithium Battery (Default)
- fixed 28.7V
- Lead-acid Battery
- 29.2V (28.0...32.0V)
- LVD (Low Voltage Disconnection):
- Lithium Battery (Default)
- 21.3V (19.6...23.0V)
- Lead-acid Battery
- 22.2V (21.0...23.0V)
- LVR (Low Voltage Reconnection):
- Lithium Battery (Default)
- 24.0V (23.5...25.0V)
- Lead-acid Battery
- 23.5V (23.5...27.0V)
• Dimensions: 86.8 x 107.3 x 152mm
• Weight: 1251g
• Power Requirements:
- PV in: 24...45VDC
- Battery in/out: 24VDC
• Power Consumption/ Dissipation:
- 5.04W / 17.1BTU (Standby without PoE function)
- 6.96W / 23.7BTU (Full load without PoE function)
- 135.36W / 461.5BTU (Full load with PoE function)
• Compliance:
- FCC Part 15 Class A
- CE
- IEEE 802.3 10BASE-T Ethernet
- IEEE 802.3u 100BASE-TX Fast Ethernet
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet
- IEEE 802.3x Flow Control and Back Pressure
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.3af Power over Ethernet
- IEEE 802.3at Power over Ethernet Plus
- RFC 768: UDP
- RFC 791: IP
- RFC 2068 HTTP
- RFC 1157: SNMP v1
- RFC 1902: SNMP v2c
- RFC 5424: Syslog
Tuoteviittaukset:
| Tuotekoodi | Tuote |
| PLANET-NMS-500 | Network Management Controller |