Microdata Finland Oy - Tietoliikennetukkuri


5x1000T@4x UltraPoE++, 2xSFP, Industrial L3
Tuotekoodi: PLANET-IGS-5225-4UP1T2S
Valmistajan koodi: IGS-5225-4UP1T2S
Tuotteen nimi: 5x1000T@4x UltraPoE++, 2xSFP, Industrial L3
-40...+75C, IP30, DI/DO, DIN
Tuoteryhmä: Industrial PoE
Valmistaja: PLANET Technology
Viivakoodi: 4711605282444
Takuuaika 24 kk
Lisätiedot: Avaa tuotesivu
Tuote-esite
Lataa käsikirja / asennusohje
Pika-asennusopas (QIC)
Tuote-esitys
Myyntiopas


PLANET IGS-5225-4UP1T2S on teollisuuskäyttöön suunniteltu
7-porttinen hallittava DIN-kiskoon asennettava Ultra PoE++
kytkin laajennetulla käyttölämpötila-alueella. Layer 3-tason
kytkin on varustettu 4x 10/100/1000Base-T Ultra PoE++, 1x
10/100/1000 kupariportilla sekä 2x 100/1000 SFP-portilla.

Tekniset tiedot
• 4x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with
802.3bt PoE++ Injector function
• 1x 10/100/1000BASE-T Gigabit Ethernet RJ45 port
• 2x 100/1000BASE-X SFP slots for SFP type auto
detection
• One RJ45 console interface for basic management and setup
• 802.3bt Power over Ethernet
• Complies with IEEE 802.3bt Power over Ethernet Plus Plus
Type-4 PSE
• Backward compatible with IEEE 802.3at/af PD device
• Up to 4 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt
PoE++ devices powered
• Supports PoE power up to 95 watts for each PoE port
• Total of 240-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100m
• PoE management features
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE admin-mode control
- PoE port power feeding priority
- Per PoE port power limit
- PD classification detection
• Intelligent PoE features
- Temperature threshold control
- PoE usage threshold control
- PD alive check
- PoE schedule
• Industrial Case and Installation
• IP30 aluminum case
• DIN-rail or wall-mount design
• 48...56VDC, redundant power with reverse polarity
protection
• Supports 6000VDC Ethernet ESD protection
• -40...+75C operating temperature
• Digital Input and Digital Output
• 2x Digital Input (DI)
• 2x Digital Output (DO)
• Integrate sensors into auto alarm system
• Transfer alarm to IP network via email and SNMP trap
• Layer 2 Features
• High performance of Store-and-Forward architecture, and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
• Storm Control support
- Broadcast/Multicast/Unicast
Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095 VLAN IDs
- Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
- GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
- BPDU Guard
• Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 3 trunk groups with 3 ports per trunk group
- Up to 6Gbps bandwidth (duplex mode)
• Provides port mirror (1-to-1)
• Port mirroring to monitor the incoming or outgoing traffic
on a particular port
• Loop protection to avoid broadcast loops
• Supports G.8032 ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any
point between the two devices
• Link Layer Discovery Protocol (LLDP)
• Layer 3 IP Routing Features
• IPv4/IPv6 Layer 3 static routing
• Supports maximum 32 software static routes and route
summarization
• Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8x priority queues on all switch ports
• Traffic classification
- IEEE 802.1p CoS
- IP TOS/DSCP/IP precedence
- IP TCP/UDP port number
- Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing on the switch port
• DSCP remarking
• Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port filtering
• IPv6 MLD snooping port filtering
• MVR (Multicast VLAN Registration)
• Security
• Authentication
- IEEE 802.1X Port-based/MAC-based network access
authentication
- Built-in RADIUS client to cooperate with the RADIUS
servers
- TACACS+ login users access authentication
- RADIUS/TACACS+ users access authentication
• Access Control Lit
- IP-based Access Control List (ACL)
- MAC-based Access Control List
• Source MAC/IP address binding
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
• MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder
• Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
- Console/Telnet Command Line Interface
- Web switch management
- SNMP v1 and v2c switch management
- SSH/SSL and SNMP v3 secure access
• SNMP Management
- Four RMON groups (history, statistics, alarms, and events)
- SNMP trap for interface Link Up and Link Down noticiation
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
- Firmware upload/download via HTTP
- Reset button for system reboot or reset to factory default
- Dual images
• DHCP Relay
• DHCP Option 82
• DHCP Server
• User Privilege levels control
• Network Time Protocol (NTP)
• Network Diagnostic
- ICMPv6/ICMPv4 remote ping
- Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
- SFP-DDM (Digital Diagnostic Monitor)
• SMTP/Syslog remote alarm
• System Log
• PLANET Smart Discovery Utility for deployment management