PLANET IGS-620TF on teollisuuskäyttöön soveltuva 6-
porttinen 10/100/1000 (4x TX / 2x SFP) Ethernet-
kytkin laajennetulla käyttölämpötila-alueella sekä DIN-
kiskokiinnityksellä.
Tekniset tiedot:
• 4x 10/100/1000Base-T RJ-45 with auto MDI / MDI-X
function
• 2x SFP slot interface, SFP supports 1000Base-X and
100Base-FX transceiver via DIP switch configured
• Fiber Port Redundancy
• Link status auto-detect and redundant on Dual ports with
the same connector type
• Only Primary-Port is active at a time, the Backup-Port is
blocked
• When Primary-Port link failure occurs, the traffic will
swap to Backup-Port automatically.
• Once the Primary-Port status is back to link-up, the
traffic will swap from Backup-Port to Primary-Port.
• Supports Auto-negotiation and 10/100Mbps half / full
duplex and 1000Mbps full duplex mode
• High performance Store and Forward architecture, runt/CRC
filtering eliminates erroneous packets to optimize the
network bandwidth
• Prevents packet loss with back pressure (Half-Duplex) and
IEEE 802.3x PAUSE frame flow control (Full-Duplex)
• 9k Jumbo Frame Size support
• Backplane (Switching Fabric): 12Gbps
• Integrated address look-up engine, support 1K absolute MAC
addresses
• Automatic address learning and address aging
• CSMA/CD Protocol
• Slim IP30 metal case protection
• DIN Rail and Wall Mount Design
• Redundant Power Design
- 12 to 48V DC, redundant power with polarity reverse
protect function
- AC 24V power adapter acceptable
• Supports EFT protection 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• Käyttölämpötila-alue: -40...+75C
• Dimensions: 32x87.8x135mm
• Weight: 425g
• Compliance: FCC Part 15 Class A, CE
Tuoteviittaukset:
