|
|
PLANET IGS-6325-4UP2X on 6-porttinen 10 Gigabitin hallittava
DIN-kiskoon asennettava Ultra PoE (802.3bt) Ethernet-kytkin
laajennetulla käyttölämpötila-alueella.
Layer 3 -tason kytkin on varustettu 4x
10/100/1000/2500Base-T -kupariportilla sekä
2x 1000/2500Base-X / 10GBase-SR/LR SFP/SFP+ -
moduulipaikalla.
Tekniset tiedot
• 4x 10/100/1G/2.5GBASE-T RJ45 copper ports with 802.3bt
PoE++ Injector function
• 2x 10GBASE-SR/LR SFP+ slots, compatible with 1G/2.5GBASE-X
SFP
• 1x RJ45-to-RS232 console interface for basic management
and setup
• Ruggedly Reliable
• Dual power input, redundant power with reverse polarity
protection
• 48...54VDC input
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply
• Fault tolerance and resilience
• DIN-rail and wall-mount designs
• IP30 aluminum case
• Supports 4KVDC Ethernet ESD protection.
• -40...75C operating temperature
• 2x digital inputs (DI)
• 2x digital outputs (DO)
• Integrates sensors into auto alarm system.
• Transmits alarm to IP network via email and SNMP trap
• IEEE 802.3bt Power over Ethernet
• Compliance with IEEE 802.3bt Type-4 PoE++ standard
• Backward compatibility with IEEE 802.3at/af PD device
• Powers up to four IEEE 802.3bt PoE++ devices (backward
compatible with IEEE 802.3af/at)
• Supports PoE with power up to 95W for each PoE port.
• Total of 360W PoE budget
• A single power input can provide a power budget of up to
240W
• Two power inputs can provide a power budget of up to 360W.
• Detects Powered Devices (PD) automatically.
• Circuit protection prevents power interference between
ports
• Power feeding up to 100m
• PoE management features
• Total PoE power budget control
• Per port PoE function enable/disable
• PoE admin-mode control
• PoE port power feeding priority
• Per PoE port power limit
• PD classification detection
• PoE extension mode to support power feeding up to a
maximum distance of 160 meters
• Intelligent PoE features
• Temperature threshold setting
• PoE usage threshold setting
• PD alive check
• PoE schedule
• Layer 3 IP Routing Features
• IPv4 dynamic routing protocol supports RIPv2 and OSPFv2
• IPv6 dynamic routing protocol supports OSPFv3.
• IPv4/IPv6 hardware static routing
• The routing interface provides a per-VLAN routing mode
• Layer 2 Features
• The Store-and-Forward architecture offers high
performance, while the runt/CRC filtering eliminates
erroneous packets to optimize network bandwidth.
• Storm control support
• Broadcast/Multicast/Unknown unicast
• VLAN support includes:
• IEEE 802.1Q tagged VLAN
• Provider bridging (VLAN Q-in-Q IEEE 802.1ad)
• Private VLAN Edge (PVE)
• Protocol-based VLAN
• MAC-based VLAN
• Voice VLAN
• GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol including:
• IEEE 802.1D Spanning Tree Protocol (STP)
• IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
• IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
• BPDU Guard
• Supports Link Aggregation including:
802.3ad Link Aggregation Control Protocol (LACP: 6 ports/3
groups max.)
• Cisco ether-channel (static trunk: 6 ports/3 groups max.)
• Provides port mirror (Many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic
on a particular port
• Loop protection to avoid broadcast loops
• Link Layer Discovery Protocol (LLDP)
• Compatible with Cisco Uni-Directional Link Detection
(UDLD), which monitors a link between two switches and
blocks the ports on both ends of the link if the link fails
at any point between the two devices.
• Supports G.8032 ERPS (Ethernet Ring Protection Switching).
• Supports IEEE 1588v2 PTP (Precision Time Protocol)
transparent clock mode.
• Quality of Service
• Ingress shaper and egress rate limit per port bandwidth
control
• 8x priority queues on all switch ports
• Traffic classification
• IEEE 802.1p CoS
• ToS/DSCP/IP Precedence of IPv4/Ipv6 packets
• IP TCP/UDP port number
• Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing on the switch port
• DSCP remarking
• Voice VLAN
• Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port filtering
• IPv6 MLD snooping port filtering
• MVR (Multicast VLAN Registration)
• Security
• Authentication
• IEEE 802.1x port-based/MAC-based network access
authentication
• IEEE 802.1x authentication with guest VLAN
• Built-in RADIUS client to work with RADIUS servers
• RADIUS/TACACS+ users access authentication
• Guest VLAN assigns clients to a restricted VLAN with
limited services
• Access Control List
• IP-based Access Control List (ACL)
• MAC-based Access Control List (ACL)
• Source MAC/IP address binding
• DHCP Snooping filters distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
• MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management prevents unauthorized
intruder
• Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
• Console and Telnet Command Line Interface
• HTTP web switch management
• SNMP v1 and v2c switch management
• SSHv2, TLSv1.2 and SNMPv3 secure access
• SNMP Management
• Four RMON groups (history, statistics, alarms, and events)
• SNMP trap for interface Link Up and Link Down notification
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
• Firmware upload/download via HTTP
• Reset button for system reboot or reset to factory default
• Dual images
• DHCP Functions:
• DHCP Relay
• DHCP Option82
• DHCP Server
• User Privilege levels control
• Network Time Protocol (NTP)
• Network Diagnostic
• SFP-DDM (Digital Diagnostic Monitor)
• ICMPv6/ICMPv4 remote ping
• SMTP/Syslog remote alarm
• System Log
• PLANET Smart Discovery Utility for deployment management
• PLANET UNI-NMS (Universal Network Management) and
• CloudViewer app for deployment management