Microdata Finland Oy - Tietoliikennetukkuri


Tuotekoodi: PLANET-TSN-5225-4T
Valmistajan koodi: TSN-5225-4T
Tuotteen nimi: 4x100/1000T -40...+75C
Industrial Switch, Managed, TSN, DIN, IP30
Tuoteryhmä: Time-Sensitive Networking
Valmistaja: PLANET Technology
Viivakoodi: 4711605287838
Takuuaika 24 kk
Lisätiedot: Avaa tuotesivu
Tuote-esite
Lataa käsikirja / asennusohje
Pika-asennusopas (QIC)
Tuote-esitys
CE-hyväksyntä


PLANET TSN-5225-4T on teollisuuskäyttöön suunniteltu
hallittava TSN (Time-Sensitive Networking) ethernet-kytkin,
jossa on 4x 10/100/1000Base-T kupariporttia.

Kestävä IP30-suojattu metallikotelo, DIN-kisko- ja
seinäkiinnitysmahdollisuus sekä laajennettu
käyttölämpötila-alue (-40...+75C) tekevät siitä luotettavan
ratkaisun vaativiin teollisuusympäristöihin.

TSN-5225-4T tukee IEEE 1588v2 PTP-aikasykronointia kaikissa
porteissa sekä keskeisiä TSN-standardeja, kuten IEEE
802.1AS-Rev, 802.1Qbv, 802.1Qbu, 802.3br, 802.1Qci ja
802.1CB. Tämä mahdollistaa erittäin pienen viiveen ja
luotettavan reaaliaikaisen tiedonsiirron, mikä tekee
laitteesta erinomaisen valinnan Industry 4.0 -sovelluksiin,
5G NR -verkkoihin, 4K/8K-videostriimaukseen ja VR/AR-
ympäristöihin.

Laite tukee ERPS-rengassuojausta, MSTP:tä, VLAN-
ominaisuuksia, LACP-linkkiaggregaatiota sekä
suojaustoimintoja, kuten ACL, 802.1X, DHCP Snooping ja IP
Source Guard. Lisäksi siinä on 2 digitaalituloa ja 2
digitaalilähtöä hälytysten integrointiin sekä 6000VDC
Ethernet ESD-suojaus.

Tuotepakkaus sisältää TSN-5225-4T-kytkimen, DIN-
kiskokiinnikkeen (esiasennettuna), seinäkiinnityslevyn ja
ruuvit, RJ45-DB9 RS232-konsolikaapelin sekä
englanninkielisen pikaoppaan.
Tekniset tiedot:
• 4x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
• 1x RJ45 console interface for basic management and setup
• Dual power input, redundant power with reverse polarity
protection:
- 9...48VDC input or 24VAC input
- Active-active redundant power failure protection
- Backup of catastrophic power failure on one supply
- Fault tolerance and resilience
• IP30 metal case
• DIN-rail and wall-mount designs
• Supports 5000VDC Ethernet ESD protection
• -40...+75C operating temperature
• 2 digital input (DI)
• 2 digital output (DO)
• Integrates sensors into auto alarm system
• Transfers alarm to IP network via email and SNMP trap
• High Precision Time Synchronization:
- IEEE1588 (Time Stamping)
- 802.1AS-Rev gPTP default profile
• Shapers:
- 802.1Qbv Enhancements for Scheduled Traffic
- 802.1Qch (Cyclic Queuing and Forwarding)
• TSN Stream Policing:
- 802.1Qci (Per Stream Filtering and Policing)
• Redundancy:
- 802.1CB FRER for seamless redundancy
- Also standard Linear and Ring protection
• Delay Reduction:
- IEEE 802.1Qbu Frame Preemption,
- IEEE 802.3br Interspersing Express Traffic (IET)
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture, and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
• Storm Control support:
- Broadcast/Multicast/Unicast
• Supports VLAN:
- IEEE 802.1Q tagged VLAN
- Supports provider Bridging (VLAN Q-in-Q, IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Port Isolation
- MAC-based VLAN
- Protocol-based VLAN
- Voice VLAN
- VLAN Translation
- GVRP
• Supports Spanning Tree Protocol:
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
- BPDU Guard
• Supports Link Aggregation:
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum2 trunk groups with 4 ports per trunk group
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic
on a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any
point between the two devices
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Supports maximum 32 static routes and route summarization
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Traffic classification:
- IEEE 802.1p CoS
- IP TOS/DSCP/IP precedence
- IP TCP/UDP port number
- Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
raffic-policing on the switch port
• DSCP remarking
• Voice VLAN
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port filtering
• IPv6 MLD snooping port filtering
• Multicast VLAN Registration (MVR) support
• Authentication:
- IEEE 802.1x Port-based/MAC-based network access
authentication
- Built-in RADIUS client to co-operate with the RADIUS
servers
- TACACS+ login users access authentication
- RADIUS/TACACS+ users access authentication
• Access Control List:
- IP-based Access Control List (ACL)
- MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snooping to filter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces:
- Console/Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
- SSHv2 and TLSv1.2 secure access
• IPv6 IP Address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance:
- Firmware upload/download via HTTP
- Configuration upload/download through HTTP
- Reset button for system reboot or reset to factory default
- Dual Images
• DHCP Relay
• DHCP Option82
• DHCP Server Mode support
• User Privilege levels control
• NTP (Network Time Protocol)
• Network Diagnostic:
- ICMPv6/ICMPv4 Remote Ping
• SMTP/Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMP trap for interface Link up and Link down notification
• System Log
• PLANET Smart Discovery Utility for deployment management
• PLANET NMS comes with NMSViewerPro and CloudViewerPro
applications for deployment management
• Power Requirements:
- 9..48VDC @ 1.5A max
- 24VAC @ 1A max
• Power Consumption
- DC input:
- Max. 8.36W / 28.53BTU (system on)
- Max. 9.89W / 33.75BTU (Full load)
- AC 24V input:
- Max. 6.2W / 21.16BTU (system on)
- Max. 7.9W / 26.96BTU (Full load)
• Dimensions: 60 x 135 x 135mm
• Weight: 962g
• Compliance: FCC Part 15 Class A, CE: EN55032, EN55035

Tuoteviittaukset:

Tuotekoodi Tuote