|
|
PLANET XGS-6350-48X2Q4C on 54-porttinen L3 kuitukytkin,
jossa on 48x SFP+/SFP modulipaikkaa 10G ja 1G moduleille
2x 40/10G QFP+ moduulipaikka sekä 4x 100/40G Gigabitin
QSFP28 modulipaikkaa uplink-yhteyksille.
Tekniset tiedot:
• 48x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-
SX/LX/BX SFP
• 2x QSFP+ slots with each supporting 40G and 4 x 10 Gigabit
Ethernet modes
• 4x QSFP28 slots with each supporting native 100 Gigabit
Ethernet, 40G and 4 x 10 Gigabit Ethernet modes
• RJ45 to DB9 console interface for switch basic management
and setup
• MNG port for HTTP server access
• USB port
• Static Routing, RIP v1/v2, OSPF and BGP
• Policy Routing
• BFD for OSFP and BGP
• IPv6 Features
• ICMPv6, DHCPv6, ACLv6,IPv6 Telnet
• IPv6 Neighbor Discovery
• Path MTU Discovery
• MLD and MLD Snooping
• IPv6 Static Routing, RIPng, OSPFv3 and BGP4+
• Manual Tunnel, ISATAP Tunnel and 6-to-4 Tunnel
• Supports Multicast Routing Protocols:
- PIM-DM (Protocol Independent Multicast - Dense Mode)
- PIM-SM (Protocol Independent Multicast - Sparse Mode)
- PIM-SSM (Protocol Independent Multicast - Source-Specific
Multicast Mode)
• Supports IGMP v1/v2/v3
• Supports VLAN
- IEEE 802.1Q tag-based VLAN
- Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
- GVRP for dynamic VLAN management
- Private VLAN
• Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
- STP, IEEE 802.1D (Classic Spanning Tree Protocol)
- RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
- MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol,
spanning tree by VLAN)
• Port mirroring to monitor the incoming or outgoing traffic
on a particular port (many to 1)
• Loop protection to avoid broadcast loops
• Link Layer Discovery Protocol (LLDP)
• Ethernet OAM 802.3ah/802.1ag/ITU-Y.1731
• Supports G.8032 ERPS (Ethernet Ring Protection Switching)
• Quality of Service
• Ingress shaper and egress rate limit per port bandwidth
control
• 8x priority queues on all switch ports
• IEEE 802.1p CoS/DSCP/Precedence
• VLAN ID
• Policy-based ingress and egress QoS
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• MVR (Multicast VLAN Registration)
• Authentication
• IEEE 802.1x port-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS
servers
• RADIUS/TACACS+ users access authentication
• Access Control List
• IP-based Access Control List (ACL)
• MAC-based Access Control List (ACL)
• Time-based ACL
• DHCP Snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
• MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
• Console and Telnet Command Line Interface
• HTTP web switch management
• SNMP v1 and v2c switch management
• SSHv2, SSLv3, TLSv1.0 and SNMP v3 secure access
• SNMP Management
• Four RMON groups (history, statistics, alarms, and events)
• SNMP trap for interface Link Up and Link Down notification
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
• Firmware upload/download via HTTP
• Reset button for system reboot or reset to factory default
• Dual images
• DHCP Functions:
- DHCP Relay
- DHCP Option 82
- DHCP Server
• User Privilege levels control
• Network Time Protocol (NTP), SPAN, RSPAN
• Network Diagnostic
• SFP-DDM (Digital Diagnostic Monitor)
• ICMP remote IP ping
• Syslog remote alarm
• System Log
• Stacking Management
- Virtualized multiple XGS-6350-48X2Q4C switches integrated
into one logical device
- Single IP address stack management, supporting up to 2
hardware units stacked together
- Stacking architecture supports redundant Ring mode