|
|
PLANET GS-6322-48UP4X on hallittava ja pinottava Layer 3 -
tason PoE-kytkin, jossa on 48x 10/100/1000BASE-T 802.3bt
PoE++ -porttia sekä 4x 10G SFP+ -porttia, ja kaksi
modulaarista virtalähdepaikkaa.
GS-6322-48UP4X tukee jopa 95W tehoa per portti (IEEE 802.3bt
Type 4) ja tarjoaa kokonaispoe-budjetin jopa 3200 wattia,
mikä tekee siitä erinomaisen ratkaisun vaativiin
sovelluksiin, kuten PTZ-kameroihin, langattomiin
tukiasemiin, infonäyttöihin ja PoE-valaistukseen. Laite
tukee sekä redundanttia (RPS) että laajennettua (EPS)
virtalähdekonfiguraatiota.
Kytkin tukee IPv4/IPv6-reititystä, OSPFv2:ta, kehittyneitä
suojausominaisuuksia (ACL, 802.1X, DHCP Snooping, IP Source
Guard) sekä rengassuojausta (ITU-T G.8032 ERPS) ja MSTP:tä.
ONVIF-tuki helpottaa IP-valvontalaitteiden hallintaa, ja
PoE-hallintaominaisuudet, kuten PD Alive Check ja ajastettu
virrankierrätys, parantavat luotettavuutta ja
energiatehokkuutta.
Tuotepakkaus sisältää kytkimen lisäksi kumitassut, 19"
räkkikiinnikkeet sekä englanninkielisen pikaoppaan.
Ei sisällä virtalähdettä. Yhteensopivia ovat mm. PLANET PWR-
CRPS920, PWR-CRPS1200 ja PWR-CRPS2000.
Tekniset tiedot:
• 48x 10/100/1000BASE-T Gigabit RJ45 copper ports with 48-
port IEEE 802.3bt PoE++ injector function
• 4x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-
SX/LX/BX SFP and 2.5G SFP transceiver
• 1x USB Type C console interface for switch basic
management and setup
• Complies with IEEE 802.3bt Power over Ethernet Plus Plus
• Backward compatible with IEEE 802.3at Power over Ethernet
Plus
• Up to 48 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt
PoE devices powered
• 48x PoE ports with built-in 802.3bt PoE++ 95W injector
function
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100 meters
• PoE management features:
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE admin-mode control
- PoE port power feeding priority
- Per PoE port power limit
- PD classification detection
- PoE extend mode control to support power feeding up to 200
meters
• Intelligent PoE features
- Temperature threshold control
- PoE usage threshold control
- PD alive check
- PoE schedule
• IP dynamic routing protocol supports RIPv2, OSPFv2 and
OSPFv3
• IPv4/IPv6 hardware static routing
• Routing interface provides per VLAN routing mode
• IP interfaces (Max. 128 VLAN interfaces)
• Routing table (Max. 128 routing entries)
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
• Storm Control support:
- Broadcast/multicast/unknown unicast
• Supports VLAN:
- IEEE 802.1Q tagged VLAN
- Out of 4096 VLAN IDs
- Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
- GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol:
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
Spanning Tree by VLAN
- BPDU Guard
• Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 4 trunk groups with 4 ports for each trunk group
-Up to 80Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic
on a particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco uni-directional link detection
(UDLD) that monitors a link between two switches and blocks
the ports on both ends of the link if the link fails at any
point between the two devices
• Link Layer Discovery Protocol (LLDP)
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Traffic classification:
- IEEE 802.1p CoS
- TOS/DSCP/IP precedence of IPv4/IPv6 packets
- IP TCP/UDP port number
- Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Traffic-policing on the switch port
• DSCP remarking
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port filtering
• IPv6 MLD snooping port filtering
• Multicast VLAN Registration (MVR) support
• Authentication:
- IEEE 802.1x port-based/MAC-based network access
authentication
- Built-in RADIUS client to cooperate with the RADIUS
servers
- TACACS+ login users access authentication
- RADIUS/TACACS+ users access authentication
-Guest VLAN assigns clients to a restricted VLAN with
limited services.
• Access Control List:
- IP-based Access Control List (ACL)
- MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snooping to filter untrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
• MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces:
- Console/Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
-SSHv2, TLSv1.2 and SNMP v3 secure access
• SNMP Management:
- Four RMON groups (history, statistics, alarms and events)
- SNMP trap for interface Link Up and Link Down notification
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance:
- Firmware upload/download via HTTP/TFTP
- Reset button for system reboot or reset to factory default
- Dual images
• DHCP Relay and DHCP Option 82
• DHCP Server
• User Privilege levels control
• NTP (Network Time Protocol)
• Network Diagnostic:
- SFP-DDM (Digital Diagnostic Monitor)
- ICMPv6/ICMPv4 remote ping
- Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
• SMTP/Syslog remote alarm
• System Log
• PLANET Smart Discovery Utility for deployment management
• Smart fan with speed control
• Dual redundant modular power supply slots
• Supports configurable power operation modes
- Redundant Power Supply (RPS, 1+1): Provides 1+1 power
redundancy when two PSUs are installed.
- Extended Power Supply (EPS, 2+0): Provides more power
budget by combining two PSUs to share the maximum power
budget
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply
• Fault tolerance and resilience
• Fan: 3 smart fans
• PoE Power Output:
- Per port 54VDC
- 802.3bt Type-4 mode, Port-1 to Port-48: max 90W
- UPoE mode, Port-1 to Port-48: maximum 95W
- End-span mode: maximum 36W
- Mid-span mode: maximum 36W
- Force mode: maximum 60W
• Power Requirements:
- Single 2000W PSU: 100...240VAC, 50/60Hz @ 10.5A
- Dual 2000W PSUs: 100...240VAC, 50/60Hz @ 21A
• Power Consumption:
- Max. 49.8W / 170.03 BTU (Power on without any connection)
- Max. 3361W / 11458.26 BTU (Full load)
• Dimensions: 444 x 331 x 44mm, 1U height
• Weight: 5478g
• Operating Temperature: 0...+50C
• Compliance: FCC Part 15 Class A, CE