|
![]() |
PLANET IGS-6325-5X1T on 6-porttinen 10 Gigabitin hallittava
DIN-kiskoon asennettava Etehernet-kytkin laajennetulla
käyttölämpötila-alueella. L3-kytkin on varustettu 5x
1G/2.5G/5G/10G SFP/SFP+ moduulipaikalla sekä 1x
1G/2.5G/5G/10G kupariportilla.
Tekniset tiedot
1x 100/1G/2.5G/5G/10GBASE-T RJ45 copper port
5x 10GBASE-SR/LR SFP+ slots, compatible with 1G/2.5GBASE-X
SFP
1x RJ45-to-RS232 console interface for basic management
and setup
Industrial Hardened Design
Dual power input, redundant power with reverse polarity
protection
DC 9 to 48V input or AC 24V input
Active-active redundant power failure protection
Backup of catastrophic power failure on one supply
Fault tolerance and resilience
DIN-rail and wall-mountable designs
IP30 aluminum case
Supports 6000VDC Ethernet ESD protection
-40...+75C operating temperature
Digital Input and Digital Output
2x digital input (DI)
2x digital output (DO)
Integrates sensors into auto alarm system
Transfers alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
IPv4 dynamic routing protocol supports RIPv2 and OSPFv2
and IPv6 OSPFv3
IPv6 dynamic routing protocol supports OSPFv3
IPv4/IPv6 hardware static routing
Routing interface provides per VLAN routing mode
Layer 2 Features
High performance of Store-and-Forward architecture, and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
Storm control support
Broadcast/Multicast/Unknown unicast
Supports VLAN
IEEE 802.1Q tagged VLAN
Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)
Private VLAN Edge (PVE)
Protocol-based VLAN
MAC-based VLAN
Voice VLAN
GVRP (GARP VLAN Registration Protocol)
Supports Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
BPDU Guard
Supports Link Aggregation
802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (static trunk)
Maximum 3 trunk groups, with 6 ports for each trunk
Provides port mirror (many-to-1)
Port mirroring to monitor the incoming or outgoing traffic
on a particular port
Loop protection to avoid broadcast loops
Link Layer Discovery Protocol (LLDP)
Compatible with Cisco uni-directional link detection
(UDLD) that monitors a link between two switches and blocks
the ports on both ends of the link if the link fails at any
point between the two devices
Supports G.8032 ERPS (Ethernet Ring Protection Switching)
IEEE 1588v2 PTP (Precision Time Protocol) transparent
clock mode
Quality of Service
Ingress shaper and egress rate limit per port bandwidth
control
8x priority queues on all switch ports
Traffic classification
IEEE 802.1p CoS
ToS/DSCP/IP Precedence of IPv4/Ipv6 packets
IP TCP/UDP port number
Typical network application
Strict priority and Weighted Round Robin (WRR) CoS
policies
Supports QoS and In/Out bandwidth control on each port
Traffic-policing on the switch port
DSCP remarking
Voice VLAN
Multicast
Supports IPv4 IGMP snooping v1, v2 and v3
Supports IPv6 MLD snooping v1 and v2
Querier mode support
IPv4 IGMP snooping port filtering
IPv6 MLD snooping port filtering
MVR (Multicast VLAN Registration)
Security
Authentication
IEEE 802.1x port-based/MAC-based network access
authentication
IEEE 802.1x authentication with guest VLAN
Built-in RADIUS client to cooperate with the RADIUS
servers
RADIUS/TACACS+ users access authentication
Guest VLAN assigns clients to a restricted VLAN with
limited services
Access Control List
IP-based Access Control List (ACL)
MAC-based Access Control List (ACL)
Source MAC/IP address binding
DHCP Snooping to filter distrusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
IP Source Guard prevents IP spoofing attacks
IP address access management to prevent unauthorized
intruder
Management
IPv4 and IPv6 dual stack management
Switch Management Interfaces
Console and Telnet Command Line Interface
HTTP web switch management
SNMP v1 and v2c switch management
SSHv2, TLSv1.2 and SNMPv3 secure access
SNMP Management
Four RMON groups (history, statistics, alarms, and events)
SNMP trap for interface Link Up and Link Down notification
IPv6 IP address/NTP/DNS management
Built-in Trivial File Transfer Protocol (TFTP) client
BOOTP and DHCP for IP address assignment
System Maintenance
Firmware upload/download via HTTP
Reset button for system reboot or reset to factory default
Dual images
DHCP Functions:
DHCP Relay
DHCP Option82
DHCP Server
User Privilege levels control
Network Time Protocol (NTP)
Network Diagnostic
SFP-DDM (Digital Diagnostic Monitor)
ICMPv6/ICMPv4 remote ping
SMTP/Syslog remote alarm
System Log
PLANET Smart Discovery Utility for deployment management
PLANET UNI-NMS (Universal Network Management) and
CloudViewer app for deployment management