|
|
PLANET GS-4210-16UP8T4X on hallittava Layer 3 -tason kytkin,
jossa on 16x 10/100/1000BASE-T 802.3bt PoE++ -porttia, 8x
10/100/1000BASE-T -porttia sekä 4x 10G SFP+ -porttia.
GS-4210-16UP8T4 tukee jopa 95W tehoa per PoE-portti (IEEE
802.3bt Type 4) ja tarjoaa kokonaispoe-budjetin 420 wattia,
mikä tekee siitä erinomaisen ratkaisun vaativiin
sovelluksiin, kuten PTZ-kameroihin, langattomiin
tukiasemiin, infonäyttöihin ja PoE-valaistukseen.
Kytkin tukee IPv4/IPv6-hallintaa, kehittyneitä
suojausominaisuuksia (ACL, 802.1X, DHCP Snooping, IP Source
Guard) sekä rengassuojausta (ITU-T G.8032 ERPS) ja MSTP:tä.
ONVIF-tuki helpottaa IP-valvontalaitteiden hallintaa, ja
PoE-hallintaominaisuudet, kuten PD Alive Check, ajastettu
virrankierrätys ja PoE-aikataulutus, parantavat
luotettavuutta ja energiatehokkuutta.
Tuotepakkaus sisältää kytkimen lisäksi, RS-232 -
RJ45 -sarjakaapelin, kumitassut, 19" räkkikiinnikkeet,
virtajohdon sekä englanninkielisen pikaoppaan.
Tekniset tiedot:
• 16x 10/100/1000BASE-T ports with 95W 802.3bt PoE++
injector function (Ports 1 to 16)
• 8x 10/100/1000BASE-T ports (Ports 17 to 24)
• 4x 10GBASE-SR/LR SFP+ slots, backward compatible with
100/1G/2.5GBASE-X SFP transceivers (Ports XG1 to XG4)
• 1x RJ45 to DB9 console interface for switch basic
management and setup
• Hardware-based 10/100Mbit/s (half/full duplex),
1000Mbit/s
(full duplex), auto-negotiation and auto MDI/MDI-X
• IEEE 802.3x flow control for full duplex operation and
back pressure for half duplex operation
• 16k MAC address table size
• 12k jumbo frame
• Automatic address learning and address aging
• Compliant with IEEE 802.3bt Power over Ethernet Plus Plus
• 16 ports supporting IEEE 802.3bt PoE++ with each offering
up to 95 watts (ports 1-16)
• Total PoE power budget of 420 watts
• Automatic detection of powered devices (PD)
• Built-in circuit protection to prevent power interference
between ports
• Remote power feeding up to 100 meters in standard mode and
250 meters in extend mode
• Advanced PoE management capabilities:
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE port power feeding priority
- Per PoE port power limitation
- Detection of PD classification
• Intelligent PoE features:
- PD alive check
- PoE schedule
- Scheduled power recycling
• Supports VLAN
- IEEE 802.1Q tagged VLAN
- Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
- Protocol VLAN
- Private VLAN (Protected port)
- Management VLAN
- GVRP
• Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol)
- RSTP (Rapid Spanning Tree Protocol)
- MSTP (Multiple Spanning Tree Protocol)
- STP BPDU Guard, BPDU Filtering and BPDU Forwarding
• Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 8 trunk groups, up to 8 ports per trunk group
• Supports port mirror (many-to-1)
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Link Layer Discovery Protocol (LLDP)
• Ingress and egress rate limit per port bandwidth control
• Storm control support:
- Broadcast/Unknown unicast/Unknown multicast
• Traffic classification:
- IEEE 802.1p CoS
- TOS/DSCP/IP precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports IPv4 IGMP snooping v2 and v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering
• Authentication:
- Built-in RADIUS client to cooperate with the RADIUS
servers
- RADIUS/TACACS+ login user access authentication
- DHCP Option 82
• Access control list:
- IPv4/IPv6 IP-based ACL
- IPv4/IPv6 IP-based ACE
- MAC-based ACL
- MAC-based ACE
• MAC security
- Static MAC
- MAC filtering
• Port security for source MAC address entries filtering
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP source guard prevents IP spoofing attacks
• DoS attack prevention
• IPv4 and IPv6 dual stack management
• Switch management interface
- Web switch management
- Console and telnet command line interface
- SNMP v1 and v2c switch management
- SSHv2, TLSv1.2 and SNMP v3 secure access
• SNMP Management
- Four RMON groups (history, statistics, alarms and events)
- SNMP trap for interface link up and link down notification
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• Static and DHCP for IP address assignment
• System maintenance:
- Firmware upload/download via HTTP/TFTP
- Configuration upload/download through HTTP/TFTP
- Dual images
- Hardware-based reset button for system reboot or reset to
factory default
• SNTP Network Time Protocol
• Network Diagnostic:
- SFP-DDM (digital diagnostic monitor)
- Cable diagnostics
- ICMPv4/ICMPv6 remote ping
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Event message logging to remote syslog server
• PLANET Smart Discovery Utility for deployment management
• PLANET NMS, NMSViewerPro and CloudViewerPro for deployment
management
• PLANET NMS and CloudNMS for deployment management
• Fan: 2 smart fans
• PoE Power Output: Port 1 to 16 95W (max.)
• Power Requirements: 100...240VDC, 50/60Hz
• PoE Power Budget: 420W (max)
• Power Consumption / Dissipation: Maximum 476W / 1624.02
BTU (full load)
• Dimensions: 441.1 x 207.5 x 44.2mm
• Weight: 3182g
• Operating Temperature: 0...+50C
• Compliance: FCC Part 15 Class A, CE