|
|
PLANET IGS-20040MT on teollisuuskäyttöön soveltuva 20-
porttinen hallittava 10/100/1000 (16x TX + 4x SFP) Ethernet-
kytkin laajennetulla käyttölämpötila-alueella sekä DIN-
kiskokiinnityksellä.
Tekniset tiedot:
16x 10/100/1000Base-T RJ45
4x 100/1000Base-X mini-GBIC/SFP
1x RJ45 console interface for basic management and setup
IP30 aluminum case protection
DIN-rail and wall-mount design
Redundant Power Design
- 12...48VDC, redundant power with polarity reverse
protect function
- 24VAC power adapter acceptable
Supports EFT protection for 6000VDC power and 6000VDC
Ethernet ESD protection
-40...+75C operating temperature
2x Digital Input (DI)
2x Digital Output (DO)
Integrates sensors into auto alarm system
Transfers alarm to IP network via email and SNMP trap
High performance of Store-and-Forward architecture and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
Storm Control support
- Broadcast / Multicast / Unknown Unicast
Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095 VLAN IDs
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
Supports Spanning Tree Protocol
- STP, IEEE 802.1D Spanning Tree Protocol
- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol by VLAN
- BPDU Guard
Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (Static Trunk)
- Maximum 10 trunk groups, up to 8 ports per trunk group
- Up to 16Gbps bandwidth(duplex mode)
Provides port mirror (many-to-1)
Loop protection to avoid broadcast loops
Supports E.R.P.S. (Ethernet Ring Protection Switching)
IEEE 1588 and Synchronous Ethernet network timing
Ingress Shaper and Egress Rate Limit per port bandwidth
control
8x priority queues on all switch ports
Traffic classification
- IEEE 802.1p CoS
- IP TOS / DSCP / IP Precedence
- IP TCP/UDP port number
- Typical network application
Strict priority and Weighted Round Robin (WRR) CoS
policies
Supports QoS and In/Out bandwidth control on each port
Traffic-policing policies on the switch port
DSCP remarking
Supports IPv4 IGMP Snooping v1, v2 and v3
Supports IPv6 MLD Snooping v1 and v2
Querier mode support
IGMP Snooping port filtering
MLD Snooping port filtering
MVR (Multicast VLAN Registration)
Authentication
- IEEE 802.1x Port-based / MAC-based network access
authentication
- Built-in RADIUS client to cooperate with the RADIUS
servers
- TACACS+ login users access authentication
- RADIUS / TACACS+ users access authentication
Access Control List
- IP-based Access Control List (ACL)
- MAC-based Access Control List
Source MAC / IP address binding
DHCP Snooping to filter un-trusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
IP Source Guard prevents IP spoofing attacks
Auto DoS rule to defend DoS attack
IP address access management to prevent unauthorized
intruder
Supports maximum 128 static routes and route summarization
IPv4 and IPv6 dual stack management
Switch Management Interfaces
- Console / Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
- SSH / SSL secure access
IPv6 IP Address / NTP / DNS management
Built-in Trivial File Transfer Protocol (TFTP) client
BOOTP and DHCP for IP address assignment
System Maintenance
- Firmware upload/download via HTTP / TFTP
- Reset button for system reboot or reset to factory default
- Dual Images
DHCP Relay and DHCP Option82
User Privilege levels control
NTP (Network Time Protocol)
Link Layer Discovery Protocol (LLDP) and LLDP-MED
SFP-DDM (Digital Diagnostic Monitor)
Network Diagnostic
- ICMPv6 / ICMPv4 Remote Ping
- Cable Diagnostic technology provides the mechanism to
detect and report potential cabling issues
SMTP / Syslog remote alarm
Four RMON groups (history, statistics, alarms and events)
SNMP trap for interfacing Link Up and Link Down
notification
System Log
PLANET Smart Discovery Utility for deploy management